Quiz 2025 NSE7_LED-7.0: Fortinet NSE 7 - LAN Edge 7.0–Professional Sample Exam

DOWNLOAD the newest Prep4pass NSE7_LED-7.0 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1LyVF-uJ4Im7A2T_xfIj9lOxyCYD7P064

Almost everyone is trying to pass the Fortinet NSE 7 - LAN Edge 7.0 (NSE7_LED-7.0) certification exam to upgrade their CVs and land desired jobs. Every applicant of the Fortinet NSE 7 - LAN Edge 7.0 (NSE7_LED-7.0) exam faces just one problem and that is not finding real and Latest NSE7_LED-7.0 Exam Questions. Applicants are always confused about where to buy actual NSE7_LED-7.0 Exam Questions and prepare successfully for the Fortinet NSE 7 - LAN Edge 7.0 (NSE7_LED-7.0) exam in a short time.

The Fortinet NSE7_LED-7.0 Exam is aimed at professionals who are responsible for managing, configuring, and deploying Fortinet NSE 7 - LAN Edge 7.0 solutions. NSE7_LED-7.0 exam objectives include validating the knowledge of LAN Edge deployment scenarios, configuration of Fortinet NSE 7 - LAN Edge 7.0 solutions, troubleshooting LAN Edge issues, and the ability to implement security policies.

>> NSE7_LED-7.0 Sample Exam <<

New NSE7_LED-7.0 Braindumps Ebook, New NSE7_LED-7.0 Test Blueprint

The Prep4pass Fortinet NSE 7 - LAN Edge 7.0 (NSE7_LED-7.0) exam dumps are being offered in three different formats. The names of these formats are Prep4pass NSE7_LED-7.0 PDF questions file, desktop practice test software, and web-based practice test software. All these three Prep4pass NSE7_LED-7.0 Exam Dumps formats contain the real Fortinet NSE7_LED-7.0 exam questions that will help you to streamline the NSE7_LED-7.0 exam preparation process.

Fortinet NSE 7 - LAN Edge 7.0 Sample Questions (Q10-Q15):

NEW QUESTION # 10
When you configure a FortiAP wireless interface for auto TX power control which statement describes how it configures its transmission power"?

A. Every 30 seconds FortiGate measures the signal strength of the weakest associated client The AP will then configure its radio power to match the detected signal strength of the client
B. Every 30 seconds FortiGate measures the signal strength of adjacent FortiAP interfaces It will adjust the adjacent AP power to be detectable at -70 dBm
C. Every 30 seconds FortiGate measures the signal strength of adjacent AP interfaces It will adjust its own AP power to match the adjacent AP signal strength
D. Every 30 seconds the AP will measure the signal strength of the AP using the client The AP will adjust its signal strength up or down until the AP signal is detected at -70 dBm

Answer: D

Explanation:
Explanation
According to the FortiAP Configuration Guide1, "Auto TX power control allows the AP to adjust its transmit power based on the signal strength of the client. The AP will measure the signal strength of the client every 30 seconds and adjust its transmit power up or down until the client signal is detected at -70 dBm." Therefore, option A is true because it describes how the FortiAP wireless interface configures its transmission power when auto TX power control is enabled. Option B is false because FortiGate does not measure the signal strength of adjacent AP interfaces, but rather the FortiAP does. Option C is false because FortiGate does not adjust the adjacent AP power, but rather the FortiAP adjusts its own power. Option D is false becauseFortiGate does not measure the signal strength of the weakest associated client, but rather the FortiAP does.

NEW QUESTION # 11
Which three protocols are used for controlling FortiSwitch devices on FortiGate? (Choose three.)

A. FTP
B. HTTPS
C. FortiLink
D. CAPWAP
E. IGMP

Answer: A,D,E

NEW QUESTION # 12
Refer to the exhibit.

Examine the network diagram and packet capture shown in the exhibit
The packet capture was taken between FortiGate and FortiAuthenticator and shows a RADIUS Access-Request packet sent by FortiSwitch to FortiAuthenticator through FortiGate Why does the User-Name attribute in the RADIUS Access-Request packet contain the client MAC address?

A. The client is performing user authentication
B. FortiSwitch is authenticating the client using MAC authentication bypass
C. The client is performing AD machine authentication
D. FortiSwitch is sending a RADIUS accounting message to FortiAuthenticator

Answer: B

Explanation:
Explanation
According to the exhibit, the User-Name attribute in the RADIUS Access-Request packet contains the client MAC address of 00:0c:29:6a:2b:3d. This indicates that FortiSwitch is authenticating the client using MAC authentication bypass (MAB), which is a method of authenticating devices that do not support 802.1X by using their MAC address as the username and password. Therefore, option B is true because it explains why the User-Name attribute contains the client MAC address. Option A is false because AD machine authentication uses a computer account name and password, not a MAC address. Option C is false because user authentication uses a user name and password, not a MAC address. Option D is false because FortiSwitch is sending a RADIUS Access-Request message to FortiAuthenticator, not a RADIUS accounting message.

NEW QUESTION # 13
An administrator is testing the connectivity for a new VLAN The devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate Quarantine is disabled on FortiGate While testing the administrator noticed that devices can ping FortiGate and FortiGate can ping the devices The administrator also noticed that inter-VLAN communication works However intra-VLAN communication does not work Which scenario is likely to cause this issue?

A. Access VLAN is enabled on the VLAN
B. The FortiGate ARP table is missing entries
C. The native VLAN configured on the ports is incorrect
D. The FortiSwitch MAC address table is missing entries

Answer: D

Explanation:
Explanation
According to the scenario, the devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate. Quarantine is disabled on FortiGate, which means that the devices are not blocked by any security policy. The devices can ping FortiGate and FortiGate can ping the devices, which means that the IP connectivity is working. Inter-VLAN communication works, which means that the routing between VLANs is working. However, intra-VLAN communication does not work, which means that the switching within the VLAN is not working. Therefore, option C is true because the FortiSwitch MAC address table is missing entries, which means that the FortiSwitch does not know how to forward frames to the destination MAC addresses within the VLAN. Option A is false because access VLAN is enabled on the VLAN, which means that the VLAN ID is added to the frames on ingress and removed on egress. This does not affect intra-VLAN communication. Option B is false because the native VLAN configured on the ports is incorrect, which means that the frames on the native VLAN are not tagged with a VLAN ID. This does not affect intra-VLAN communication. Option D is false because the FortiGate ARP table is missing entries, which means that FortiGate does not know how to map IP addresses to MAC addresses. This does not affect intra-VLAN communication.

NEW QUESTION # 14
You are configuring a FortiGate wireless network to support automated wireless client quarantine using IOC Which two configurations must you put in place for a wireless client to be quarantined successfully? (Choose two)

A. Configure a firewall policy to allow communication
B. Configure the wireless network to be in bridge mode
C. Configure the wireless network to be in tunnel mode
D. Configure the FortiGate device in the Security Fabric with a FortiAnalyzer device

Answer: C,D

Explanation:
Explanation
According to the FortiGate Administration Guide, "To enable automated wireless client quarantine using IOC, you must configure the following settings: Configure your wireless network to be in tunnel mode. This allows FortiGate to inspect all wireless traffic and applysecurity policies. Configure your FortiGate device in the Security Fabric with a FortiAnalyzer device. This allows FortiAnalyzer to detect indicators of compromise (IOC) from wireless traffic and send quarantine commands to FortiGate." Therefore, options A and B are true because they describe the configurations that must be put in place for a wireless client to be quarantined successfully using IOC. Option C is false because configuring a firewall policy to allow communication is not required, as the default firewall policy for tunnel mode wireless networks is to allow all traffic. Option D is false because configuring the wireless network to be in bridge mode is not supported, as FortiGate cannot inspect or quarantine wireless traffic in bridge mode.

NEW QUESTION # 15
......

NSE7_LED-7.0 practice material contains questions & answers together with explanations. You can do your NSE7_LED-7.0 study plan according to your actual test condition. If your time is limited, you can remember the questions and answers for the NSE7_LED-7.0 preparation. While, if your time is enough for well preparation, you can study and analyze the answers with the help of the NSE7_LED-7.0 Exam explanations. No matter in which way you study for the Fortinet certification, our NSE7_LED-7.0 valid pdf dumps will ensure you 100% pass.

New NSE7_LED-7.0 Braindumps Ebook: https://www.prep4pass.com/NSE7_LED-7.0_exam-braindumps.html

What's more, part of that Prep4pass NSE7_LED-7.0 dumps now are free: https://drive.google.com/open?id=1LyVF-uJ4Im7A2T_xfIj9lOxyCYD7P064

Sean Fisher Sean Fisher

Biography

Quiz 2025 NSE7_LED-7.0: Fortinet NSE 7 - LAN Edge 7.0–Professional Sample Exam

New NSE7_LED-7.0 Braindumps Ebook, New NSE7_LED-7.0 Test Blueprint

Fortinet NSE 7 - LAN Edge 7.0 Sample Questions (Q10-Q15):

Useful Links

Subscribe Now

Home

Store

Whatsapp

Profile